All g23 lamp holder fluorescent wholesalers & g23 lamp holder fluorescent manufacturers come from members. We doesn't provide g23 lamp holder fluorescent products or service, please contact them directly and verify their companies info carefully.
Total 5391 products from g23 lamp holder fluorescent Manufactures & Suppliers |
|
Brand Name:ECORUN Model Number:ERSL-8W-G23-03 Place of Origin:China ...Lamp 3.5W 3500K 2Pin G23 LED Description 13W G23 2P PL Compact Fluorescent Bulb Replacement -PLC lamp g23 2-pin base LED CFL replacement bulb -6w LED pl g23 lamp replace 13w g23 base cfl bulb -Low heat, low power consumption, energy-saving (can save up to 90%) -for Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps,Portables, Pendant Lamps -No Ballast Required (Remove/bypass the ballast). LED PL Replacement Lamps |
Shenzhen Ecorun Technology Co.,Limited
Guangdong |
Brand Name:Sinuo Model Number:SN9926 Place of Origin:China ... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time 1 |
Sinuo Testing Equipment Co. , Limited
Guangdong |
Place of Origin:China Brand Name:HongCe Model Number:HT-LHA1 ...content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4. It |
Guangzhou HongCe Equipment Co., Ltd.
Guangdong |
Brand Name:Kingpo Place of Origin:China ...Fluorescent Lamp Holder Axial Force Tester / Lighting and Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder |
KingPo Technology Development Limited
Hong Kong |
Brand Name:ZOMLNK Model Number:ZK-TU104 Place of Origin:Guangdong, China ...Lamp holder Iron Base LED Tube Bracket for Double Fluorescent Tube Lights Key Words of LED Tube Bracket: * Power: 2x2FT / 2x4FT / 2x5FT LED tubes * Operating Voltage: AC100-277V/50-60Hz * Fully wired with VDE certified wires, terminal block, G13 lampholders; * Replicable: T8/G13 linear fluorescent tube * Materials: Iron 0.35mm thickness before painted * Suitable for both Fluorescent lamps... |
Zhongshan zuoling Lighting Co., Ltd
Guangdong |
Brand Name:Bett Model Number:E27 Lamp Holder Place of Origin:China ... Rating: 300V Description of E27 Lamp Holder E27 Lamp Holder is a great choice for your application, thanks to its waterproof level can be reached IP65, and it can be used in Outdoor. What's more, it has many colors, popular for Breeding, Planting and |
Shenzhen Bett Electronic Co., Ltd.
Guangxi |
Brand Name:UVIR Model Number:K52K Place of Origin:China ... Infrared heater Color Ceramic white + Silver Why choose us 1. Lamps are approved by CE and RoHS. 2. Implement strict quality system according to ISO9001. 3. All lamps are tested one by one before delivery out from our factory. 4. Punctual delivery time, |
Guangdong Youhui Technology Co., Ltd.
Guangdong |
Brand Name:SINOMANU Model Number:SMI-P02-12W Place of Origin:ShenZhen , China 12W G23 lamp socket LED PLC light 1500LM G23 PL LED 180 Degree retrofit In past many years , OSRAM DULUX G23 G24 LED PLC CFL Tube lights ( fluorescent tube )has be used world widely , it is born to be 360 Degree in beam angle , and can not be changed . it ... |
Shenzhen Sinomanu Industry Co., Ltd.
Guangdong |
Brand Name:HEKEYLT Model Number:HEKEYLT-70 Place of Origin:CHINA GUANGDONG ... branches and leaves design. E27 ceramic lamp holder, ceramic is effective insulation and flame retardant, safe and reliable. 4-way rotary switch + in-line switch, you can control lights on and off separately. We ... |
Shaanxi Jiayang Lighting Technology Co., Ltd.
Shaanxi |
Brand Name:allesd Model Number:LT-86A Place of Origin:China Clamp Base Illuminated Magnifying Lamp 22W Fluorescent Standard Lens Size 5 Inch Description: This lamp adopts T9 22 watt fluorescent energy-saving tube that illuminate your project, and the 5 in., 3-Diopter / 5-Diopter lens magnifies 1.75 times / 2.25 ... |
Suzhou Quanjuda Purification Technology Co., LTD
Jiangsu |
Brand Name:Aina Model Number:AN-T8-18W-Holder Place of Origin:China ...Lamp holder Single or Double T8 Tube Integrate Tube Frame Product Detail Housing-- made of advance material: Iron ,Aluminum The Diffuser Cover thickness-- 0.2mm-0.5mm End Caps-- White ABS material Feature 95mm Wide body open channel Telescopic lamp holders or Rota-lock lamp holders BODY - Cold rolled mild steel with white epoxy powder coated finish LAMP HOLDERS- Telescopic lamp holders... |
Aina Lighting Technologies (Shanghai) Co., Ltd
Beijing |
Brand Name:PEGO Model Number:E27 Place of Origin:China ... according to sheets 7004-21 and 7004-27. b. Dimension X according to sheet 7005-20. c. The mechanical compatibility of the lampholder with respect to lamps having adverse dimensions. Testing: It shall be possible to screw the threaded part of the |
Pego Electronics (Yi Chun) Company Limited
Jiangxi |
Brand Name:YBADDVANCE Model Number:DZLS-3-28 Place of Origin:China(mainland) Good Quality 3 Pin Male Electrical Automotive Lamp Holder Connector For Car Description of Product Part Number :DZLS-3-28 Connector System : Wire-to-Wire The following is showed this kinds of connector will come with which parts together. 1 x male ... |
Xi'An YingBao Auto Parts Co.,Ltd
Shaanxi |
Brand Name:TOPELE Model Number:RC Place of Origin:Zhejiang ,China ...Cover For Lamp Holder PDF Catalogue:TOPELE Weatherproof Cover.pdf Description Name:weatherproof lamp holder covers Material:Aluminum Type:Gasket&Screws Model number: RC-1 ;RC-2 ; RC-3 Applications: Round Covers with Gaskets combined with lamp holder ♦... |
TOPELE ENTERPRISE CO.,LTD
Zhejiang |
Brand Name:guanbiao Model Number:1.8*4 Place of Origin:China Lamp Holder Inverted Studs Weld-Free Lamp Holder Rivets Bulb Head Rivets Copper Nickel-Plated LED Lamp Holder Rivets < Material Stainless steel, brass, copper, aluminum, aluminum alloy, steel, low carbon steel, medium carbon steel, alloy steel, titanium ... |
Dongguan Guanbiao Hardware Products Co., LTD
Guangdong |
Brand Name:SKYLINE Place of Origin:China Temperature rise test lamp holder 1. Material requirements of lamp holder for lamp holder temperature rise test: (1) Composition: Nickel with a purity of over 99.5%; (2) Structure and characteristics: the grains of the material should be fine and have ... |
SKYLINE INSTRUMENTS CO.,LTD
Guangdong |
Brand Name:KINGPO Place of Origin:China ...standard of GB1444-2008 clause 5.3 and Figure 4, it is used for impact resistance test of the lamp holder insulating shell. The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The |
Dongguan Kingpo Technology Limited
|
Brand Name:ELECMAN Model Number:LAP Place of Origin:China ...Lamp Holder With External Sealing Gasket Material: aluminum die cast and steel. Socket : Premium Grade Porcelain socket with Nickel contacts and Teflon-jacketed wire leads. Lamp Type: PAR38 Lamp Not Included, 90W Max. Voltage: 120 Volts. Wiring: Pre-wired with 24" SPT-1 Cord. Gasket: Sealed with High Grade Weatherproof Silicone Gasket. Accessories: Black Silicone ,Gasket Seals, Lamp Premium Lamp Holder... |
Hefei Elecman Electrical Co., Ltd.
|
Brand Name:RANLIC Model Number:RL-LH200 Place of Origin:Hangzhou,China Pocelain Aluminum Round Lamp Holder 1 2 3 Holes With Ceramic Lampholder Powder Coated General: 1) Gray powder coated with one or two holes with anti-fire paper 2) Four south central american markets 3) Pocelain lamp holder can change the direction just ... |
Hangzhou lianli electrical co,. ltd.
|
Brand Name:YMD Model Number:CR2L-155 Place of Origin:China Flourescent Lamp Holder For Yin Cutter Parts , CR2L -155 textile machinery parts Specifications: Suitable auto-cutter Model For Yin / Takatori Cutter Part no. CR2L-155 Description FLOURESCENT LAMP HOLDER Weight 0.014kg/pcs Delivery Time In stock Payment ... |
Shenzhen Yimingda Industrial & Trading Development Co., Limited
Guangdong |