Categories | Steel Shot Blasting Equipment |
---|---|
Brand Name: | LC |
Model Number: | Q698, Q6910, Q6918, Q6920 |
Certification: | ISO9001 |
Place of Origin: | Jiangsu, China |
MOQ: | 1 set |
Price: | Negotiable |
Payment Terms: | L/C, T/T |
Supply Ability: | 30 sets per month |
Delivery Time: | Within 30-40 Days After The Deposit |
Packaging Details: | General Container, Open Top Container, Skeletal Container, Bulk Cargo |
Name: | Steel shot blasting equipment |
Blasting media: | Steel shot, grit, cut wire shot |
Fuel: | Electric |
Industry used: | Machinery industry |
Function: | Cleaning machine |
Machine condition: | New |
Automatic Steel Shot Blasting Equipment with Roller Conveyor for Rust Removing
Steel shot blasting equipment
1. Customized design
2. High quality, competitive price
3. Site commissioning
We can design different types shot blasting machine for customers according to different workpiece requirement.
Basic Specification:
Parameter | Q698 | Q6812 | Q6915 | Q6920 | Q6925 | Q6930 | Q6940 |
The effective cleaning width (mm) | 800 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 |
Dimension of inlet opening (mm) | 1600*800 | 1200*400 | 1700*400 | 2200*400 | 2700*800 | 3200*800 | 4200*400 |
The length of cleaning workpiece (mm) | 1200-12000 | 1200-1600 | 1200-12000 | 1200-12000 | 3000-12000 | 2400-12000 | 4500-18000 |
The speed of conveyor (m/min) | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 | 0.5-4 |
The thickness of cleaning steel sheet (mm) | 3-60 | 3-60 | 1.5-60 | 3-60 | 3-60 | 3-110 | 4.5-100 |
Shot ball flow rate (kg/min) | 4*120 | 4*250 | 4*250 | 6*250 | 6*250 | 6*360 | 8*360 |
The shot ball first loading (kg) | 4000 | 4000 | 4000 | 4500 | 4500 | 8000 | 11000 |
Roll brush adjusting height (mm) | 200 | 200 | 350 | 450 | 600 | 850 | 900 |
Air capacity (m3/h) | 22000 | 17560 | 19000 | 19550 | 27758 | 28050 | 38000 |
Total power (kw) | 90 | 78.3 | 113.5 | 156.6 | 204.8 | 224.55 | 293.6 |
Structural characteristics
This machine is a special reciprocating shot blasting machine, which consists of Blasting chamber, Shot blasting wheel, Roller conveoyr, Abrasive recycling system (Screw conveyor, Elevator, Separator), Dust removal system, Electric control system, etc.
Blasting chamberScrew conveyor
The screws convey or consist of reducer, screw shaft, conveying
Housing, rolling bearing with bases, etc. It is a kinds of standard
abrasive/sand horizontal conveying device, is an important part of
the abrasive recycling system of the blasting machine.
Bucket elevator
The bucket elevator consists of speed reducer, upper and lower
rolling barrel, transmission rubber belt, bucket elevator,
enclosure and tightening device, etc.
Separator
This machine adopts advanced Model BE full shutter type separator.
The separator is mainly composed of airwash area, barrel sift,
conveying screw, abrasive hopper, manual abrasive controlling
valve.
Dust removal system
This machine adopts Cartridge or Bag type dust collector, is
exhausted air produced during working. The dedusting efficiency is
up to 99.6%, powder density is less than 100mg/m`3,much stricter
than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of
the system fails, the above components automatically stop running,
to prevent the shot ball stuck and burning power device.