Categories | Full Bore Ball Valve |
---|---|
Brand Name: | GOLD TOP |
Model Number: | Q41F |
Certification: | API6D |
Place of Origin: | 中国 |
MOQ: | 1pcs |
Supply Ability: | 100+pcs+25days |
Delivery Time: | 5~35days |
Packaging Details: | wooden box |
MATERIAL: | CF8 |
connection: | RF BW SW ASME B16.5、ASME B16.25 |
pressure: | 150lb~2500lbs |
standard: | ASME B16.34 |
Product description: | Side-mounted ball valve |
TRIM: | SS304 |
Connecting end: | ASME B16.5、ASME B16.25 |
Company Info. |
Wenzhou Goldtop Valve Co.LTD |
View Contact Details |
Product List |
API6D FULL BORE BALL VALVE R-PTFE SEAT 150LB 14INCH BALL SS304 GEAR OPERATE
Full bore ball valve is a valve that the hole diameter of its ball is the same size with the pipe size. Reduced bore ballvalves is a valve that the hole diameter of its ball is not the same size with the pipe size. In minimum the reduced ballvalves ball diameter are one size lower than the pipe size i.e. 4 inch pipe and ball diameter is 3 inch (usually symbolizedas 4 x 3 inch ball valves). From its definition we can quickly know that the full bore will have less pressure drop andreduced bore will have more pressure drop since reduced bore is just like a restriction orifice that narrowing at the middlepart. So when full bore or reduced bore ball valves will be used?
As default for offshore platform application where weight and cost is matter, the reduced bore ball valves should be used.Reduced bore ball valves is lighter in weight compare to full bore ball valves. Also, the reduced bore ball valves might beused in application where the pressure drop through the valves is not significantly effect the services (at most applicationthe pressure drop through reduced bore ball valve is very low).
For actuated ball valves that used to isolate vessel or any fluid services, reduced ball valve usually used for productionseparator, suction scrubber, glycol generator etc. While full bore actuated ball valves usually used for blow down,piggable line, production manifold, pipeline etc. Actually for blow down or any similar application, we can also use areduced bore since the pressure drop usually isn’t significant. But usually it comes from the project specificationthat requires it to be full bore. It differs with piggable line that must be in form of full bore to allow the pig going through thevalves at pigging activity.
Below is the illustration of full bore ball valve and reduced bore ball valve from Valbart.
The trunnion ball valve is used to cut off or connect the media in various of Class150~Class2500. The valves made of different materials are suitable for various media such as water, steam, oil, liquefied gas, natural gas, coal gas, nitric acid, oxidizer, urea and etc. The driving modes include manual operation and electric operation. The connection ends can be flange or butt welding.
STRUCTURAL FEATURES
1. Double Block And Bleed(DBB)
When the valve is closed and the middle cavity is emptied through
the discharge valve, the upstream and downstream seats will
independently block the fluid at the inlet and outlet to realize
double block function. Another function of the discharge device is
that the valve seat can be checked if there is any leakage during
the test. In addition, the deposits inside the body can be washed
and discharged through the discharge device to reduce damage to the
seat by impurities in the medium.
2. Low Operating Torque
The trunnion pipeline ball valve adopts the trunnion ball structure
and floating valve seat, so as to achieve lower torque under
operating pressure. It uses self-lubricating PTFE and sliding
bearing to reduce the friction coefficient to the lowest in
conjunction with the high intensity and high fineness stem.
3. Emergency Sealing Device
The ball valves with the diameter more than or equal to 6″(DN150)
are all designed with sealant injection device on stem and seat.
When the seat ring or stem O ring is damaged due to accident, the
corresponding sealant can be injected by the sealant injection
device to avoid medium leakage on seat ring and stem. If necessary,
the auxiliary sealing system can be used for washing and
lubricating the seat to maintain its cleanliness.
4. Fireproof Structure Design
In case of fire during the use of valve, the seat ring, stem O ring
and middle flange O ring made of PTFE, rubber or other non-metal
materials will be decomposed or damaged under high temperature.
Under pressure of the medium the ball valve will push the seat
retainer rapidly towards the ball to make the metal seal ring
contact the ball and form the auxiliary metal to metal sealing
structure, which can effectively control valve leakage. The
fireproof structure design of trunnion pipeline ball valve conforms
to requirements in API 607,API 6FA,BS 7655 and other standards.
Sizes:DN50~2000mmNPS 2″~48″
Pressure Range:150LB~1500LB
Body Material:WCB,WC6,LCB,WC9,CF8,CF8M,CF3 and CF3M
Soft Seats:PTFE,RPTFE,PEEK,DEVLON,NYLON.
Metal Seats: Tungsten Carbide(TC), Stellited, Ni60.
Temperature:-30ºC~425ºC
Standard :
Design: API6D, BS1414/ASME B 16.34
Face to Face: ASME B 16.10
End Flange:ASME/ANSI B 16.5,
BW End: ASME B 16.25
Test :API598
Fire safe:API607/API6FA
Anti-static NACE MR-01-75.
Application
Refinery
Chemical
Petrochemical
Power plant
Gas
Drive option:
Drive actuators offered for the knife gate valve include handwheel
with rising or non-rising stem, or alternatively double or
single-acting pneumatic cylinders, Bevel Gear, electric actuators.
Pneumatic Accessories:
Cylinder & Solenoid (FESTO,AirTAC,HERION,ASCO,UNIWO,SMC)/
Positioner(YTC,ABB, SIEMENS,AZBIL)/Filter/ Limit
switch(OUMRON,FESTO,IFM,P+F)
Electrical Motor Actuator:
Actuator Make – Rotork, Auma, ACT, Antrieb etc.