PBT V0 Chip On Board LED Array Holder Solderless Installation With M3 Screws
|
COB LED Array Source Holder Solder-less Installing with M3 Screws Quick Details: 1. Dimension: Diameter 36mm 2. Match Led: EDISON LED ARRAY HM series 3. Materials : PBT V0 4. Wire Spec. 18AWG, 20AWG, 22AWG (0.32-0.81m㎡) Specification: Product Model ......
Sollente Opto-Electronic Technology Co., Ltd
|
1200mA Amber RGB LED Array , 150W Quad RGBW COB Package LED Arrays
|
...LED Array , 150W Quad RGBW COB Package LED Arrays Features: Completely mixing for any 2 colors, no light spot Interlaced & even light array distribution for 3 colors, pure and well-distributed light for each Adaptable for various angle of Lens and reflectors Variety of power selections for different applications COB Package LED Arrays......
GUANGZHOU TIANXIN PHOTOELECTRIC CO., LTD
|
90x126 Degree 12W Led Array Lens Transparent PMMA 93% Transmittance
|
...Led Array Lens Transparent PMMA 93% Transmittance Quick Detail: Model No:SUN-LD2X6FULL Material: PMMA optical Beam Angle :90x126degree TYPE IV Lens size:158.47x50.15x8.83mm Led chips:XPE|XPG|XPC OSRAM Dense array of 12 LEDs Small footprint, high light output Description: Features : This SKD 12W LED Array......
Sunshine Opto-electronics Enterprise Co.,ltd
|
PMMA Material COB LED Lens Holder for Optimal Light Output and Glare Reduction
|
...LED Lens Holder for Optimal Light Output and Glare Reduction Quick detail Product Name: CM01LS-S9024-XX Beam Angle: 15°24°38°60° Efficiency: 88% Material: PMMA LED Chips: ∅9~14mm Dimmable: ∅90*24mm Accessory: Holder Application: Hotel Lighting,Flood Lighting,High Bay Lighting,Track Lights ect. Description PMMA Material COB LED Lens Holder for Optimal Light Output and Glare Reduction Performance: Ensure that the lens holder...
ChenMu Lighting technology co., Ltd.
|
T10 W5W 194 LED bulb holder T10 T15 Led extension socket holder cables harness sockets
|
... -Provide passage for Maximum Safe Current -Prevent Melt Down & Smoking -Tested for Heat-Proof to 480F T10 W5W bulb holder Features: 1.Pre-Wired socket for Easy Plug and Play Installation 2.good performance 3.More stable 4.T10 led bulb holder,...
Foshan YuLongXing Technology Co.,Ltd.
|
Single Sided Aluminum SMD LED Array PCB For Street Light
|
Led Array Pcb Led Pcb Smd Led Led Street Light Circuit Board Smt Pcb Assembly 1. Introduction As a kind of single-sided Aluminum PCB, LED PCB is widely used in street lamps, LED lamps, and household lamps. 2. Material: Aluminum-base PCB Item Unit ......
Shenzhen Yizhuo Electronics Co., Ltd
|
65*6.94 MM Led Ideal Holder Steel 50-2303CR For CREE CXA3590 CXB 3590 Easy Installation
|
...94 MM Led Ideal Holder Steel 50-2303CR For CREE CXA3590 CXB 3590 Easy Installation LED holder for CREE CXA3590 CXB 3590 COB,chips, lens ,refector for COB CXB3590 3500K also avaiable Prduct description For leds: Cree CXA3590, CXB3590 Holder Material: Steel ......
One Plus Lighting Co., Ltd.
|
High Power L170mm Machine Vision LED Lighting High Density LED Arrays Special Lens
|
Machine Vision LED Lighting High Power Front Light High Density LED Arrays Special Lens OPT-FLM9886D-X Model: OPT-FLM9886D-X Features: ◆ Equipped with high density LED arrays and the special lens ◆ Over 3 times the intensity compared with OPT-FL series ......
OPT Machine Vision Tech Co., Ltd.
|
E14 B22 Lamp Cap Holder Crimping Punching Tool For LED Lighting Holder Punching
|
E14 B22 Lamp Cap Holder Crimping Punching Tool For LED Lighting Holder Punching Bulb Cap Crimping Punching Nailing Testing Machine LED Lighting Bulb Cap Punching Nailing features: 5 functions: 1. Testing Light. If a bad one, no need to punch the lamp ......
ShenZhen YES Electronics Machinery Co.,Ltd
|
75mm Waterproof Cree COB LED Lens Holder Accessory For Indoor Light Illumination
|
... or reflector kits. Lens holders provide a mechanical cut-off shield and can also be used to enhance performance. They are also much easier to install than a stand-alone lens. Alternatively these kits may include an LED holder which holds the LED in...
Ningbo Spark Optics Technology Co., LTD
|
Submit your “led array holder” inquiry in a minute :