luminaires testing equipment iec 60598 2 21

Brand Name:SKYLINE

Place of Origin:China

... Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light IEC 60598-2-21 21.7 Binding Apparatus for Rope Light Overview of equipment: The lamp twine rope winding test device is made to meet the test requirements of Chapter 6.14 of IEC 60598-2-...

Brand Name:HongCe

Place of Origin:China

...Luminaires Light Testing Equipment IEC 60598-2-13 ​ Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment...

Place of Origin:China

Brand Name:KeRang

Test Gauges for Lamp Caps and Holders HDJ0001 Standard: IEC 60598-1: Luminaires - Part 1:General requirements and tests; IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Application...

Brand Name:Sinuo

Model Number:SN9929

Place of Origin:China

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment Product information: This device meets the standards of IEC60598-2-3:2011 clause 3.6.3.1, figure 1 IEC60598-2-5 clause 5.6.5. It used to detect the static load test of wind resistance for street lamps outdoors. Test principle: The working principle is to use a small sandbag to spread evenly on the road lamp under test, or use a net to cover the lamp, and then test

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

IEC 60598-2-21 Figure 2 Low-temperature Winding Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer ...

Brand Name:HJ

Model Number:HH0810A

Place of Origin:China

Test Device To Verify Protection Against Dust IP Test Equipment Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) clause 13.4, figure 2, dust test for first characteristic number 5 and 6. IEC 60598-1 Luminaires – Part 1: General requirements and test clause 9.2 test for ingress of dust, solid objects and moisture. Standard description of IEC 60598-1: Dust-proof luminaires (first characteristic IP number 5) shall be tested

Brand Name:SHC

Model Number:SC-GRE

Place of Origin:China

... Max. load 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen Production introduction:

Brand Name:PEGO

Model Number:PG-CMD

Place of Origin:China

IEC60598-1 Clause 4.14.1 (Test E) Clip-Mounted Luminaires Test Device 1. Introduction The clip test device is designed to meet the test requirement of IEC 60598-1 clause 4.14.1 (test E), it is applied for the pull force test of clip-mounted luminaires. ...

Brand Name:KingPo

Place of Origin:China

... to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load test and torque test. This equipment is controlled by PLC electrical system, the whole operation is controlled on the