optical fibre attenuation

Brand Name:CY/OEM

Place of Origin:Hu Bei Cina

Model Number:MPO

...Optic Attenuator 5dB Optical Fibre Connector MPO APC UPC 12 Core 2db 5db Female To Male Optical Fibre Connector Name: MPO Attenuator Fiber Type: Single Mode Connector: MTP/MPO Standard, Elite/Lowloss) Ferrule Type: 12F, 16F, 24F, 32F End Face: PC Or APC Optional Wavelength: 1310/1550nm Certification: ISO9001 Attenuation Range: 1~30dB Or Custom Durability: >1000 Times Return Loss: APC: ≥60db; PC:≥50dB Attenuation

Brand Name:TTI

Model Number:001

Place of Origin:Guangdong, China

...,LC,FC,ST,MU Optional Mode: Singlemode, Multimode Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Attenuators are also used to balance out transmission lines that otherwise would have unequal signal levels. Features: Complied with

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-MPO-attenuator-**dB

Place of Origin:Guangdong, China

...Optical Fibre Attenuator 12core / Fibra Optica Attenuator 1dB 3dB 5dB 30dB Introduce: - MTP/MPO attenuator loopback can achieve 40/100G parallel optical transmission system or other similar applications of a channel optical signal uniform attenuation; conventional attenuation methods require multiple independent attenuator to be applied to different optical signal channels, which is inefficient. - MTP/MPO Loopback Attenuator

Brand Name:Jiqian

Model Number:GYTS

Place of Origin:Guangzhou,China

... flexibility and bending performance Appicable fields: Duct/Underground Optical Characteristics: Fiber Type G.652 G.655 50/125^m 62.5/125^m Attenuation (+20X) 850nm <3.0 dB/km <3.3 dB/km 1300nm <1.0 dB/km <1.0 dB/km 1310nm <0.36 dB/km <0

Brand Name:YOFC

Model Number:CFOFC-YOFC Optical Fibre

Place of Origin:Guangdong, China

...Fibre G657A1/G657A2 Communication Optical Fibre Standards of Single-mode Fibre YOFC EasyBand® bending insensitive single mode fibre meets or exceeds the ITU-T Recommendation G.652.D/G.657.A1 including the IEC 60793-2-50 type B1.3/B6.a1 Optical Fibre Specification. Specification of Single-mode Fibre Characteristics Conditions Specified values Units Optical Characteristics Attenuation...

Brand Name:YINGDA

Model Number:ATTN-FCS-VOA-01

Place of Origin:china

...receiver sensitivity, usually place in the optical receiver input to adjust receiving light power. It is in the middle of fiber connector, suitable for all kinds of fibre optic connector with all high performance of connectors. When use optical attenuator,

Brand Name:DYS/OEM

Model Number:MPO

Place of Origin:Guangdong, China (Mainland)

...Attenuator MPO attenuator is used to reduce optocal-signal electric power in all channels of 40/100G Parallel Optic Transmission, and other equipment with using MPO interconnection. Technique of this product makes network's composition more concise than those of conservative way which is the connection method of Attenuator independently in each channel, as downsizing the volume and saving time. This MPO Attenuator...

Brand Name:CFO

Model Number:Attenuator

Place of Origin:China

...Optical Fiber Attenuator M - F 2db / 10db Attenuator With Metal Sleeve 1. Fiber Optic Attenuator: Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical...

Brand Name:FOCABLE

Model Number:MU/UPC Fiber Optic Attenuator

Place of Origin:China

..., FC attenuator, SC attenuator, LC attenuators and ST attenuator. The attenuators can be female to female which is called bulkhead fiber optic attenuator or male to female which is also called a plug fiber optic attenuator. Bulkhead and plug types are

Brand Name:New Light

Model Number:MPO

Place of Origin:China

...Optic Attenuator Product Name 3db 12 Fiber MPO Optical Fiber Attenuator Single Mode 9/125 Um Fiber Optic Attenuator Product Description The MPO fiber optical attenuator has female and male connectors. The attenuation can be 1-30dB according to your requirements. Normally, it is 3dB, 5dB, and 7dB attenuation. But it can be another attenuation if you need it. A fiber optic attenuator...

Brand Name:KEXINT

Model Number:Fiber optical attenuator

Place of Origin:CHINA

... for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation form 1dB to 65dB.It is design under the

Brand Name:YOUCII

Model Number:U8328

Place of Origin:China

Optical Attenuator 200 Ms Optical Power Attenuation Stabilization Time The U8328 multimode attenuator is a device used to adjust the intensity of the optical signal, which is usually used in optical fiber communication systems. It can reduce the intensity of the optical signal by introducing a certain attenuation amount, so as to achieve accurate control of the optical signal power. In optical fiber communication, the strength of the optical

Brand Name:ANC

Model Number:SC Attenuator Parts

Place of Origin:China

... by ANC International Co., Limited is used to produce SC male-female fiber optic attenuators. Fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is a

Categories:Fiber Optic Attenuator

Country/Region:china

... power. It is mainly used in the index measurement of optical fiber system, signal attenuation of short-distance communication system and system test. The product features are light weight, small size, high precision, good stability, easy to ...

Brand Name:TW

Model Number:24 core optical fiber cable joint closure

Place of Origin:dong guan china

... fiber cable distribution. It is one of commonly used equipment of user access point. Used for the outdoor connection between optical distribution cable and optical in room cable. Available for aerial,duct,direct buried application. 2. Features A. Up-down

Brand Name:Geehe or OEM

Model Number:Optical Pad Attenuator, Bulkhead Attenuator

Place of Origin:Wuhan, China

... fiber and are designed to provide consistent attenuation levels as well as maintaining polarization characteristics. Typical application for an optical pad attenuator is to reduce the amount of optical power by a specific amount as to not saturate a

Brand Name:SUNET

Model Number:SUNET-15

Place of Origin:China

...attenuator FC/UPC Singlemode plug type 5db10db 15db Male To Female optical fiber Attenuator Describtion Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical...

Model Number:LC

Place of Origin:CHINA

Brand Name:XDK

...optic Male to Female Singlemode Fiber Attenuator, Fixed Type Optical fiber attenuator is a optical passive device. It is used for optical powerperformance, optical fiber instrument debugging and correction in opticalcommunication systems, attenuates the input optical fiber signal power, and prevent sdistortion of the optical receiver due to excessive input optical power. The product ismanufactured by using attenuating...

Brand Name:QualitY or QY

Model Number:QATSC-APC

Place of Origin:Dongguan China

...Attenuator Singlemode optics fibe attenuator Introduction Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. QY can provide female to male (plug type), Bulkhead-fixed value attenuator, in-line attenuator...

Brand Name:Geehe Comm

Model Number:GH-AD-HY28

Place of Origin:Wuhan, China

...Optic Cable Attenuator 1. Product Overview: Fiber optic attenuators are used in fiber optic communications to reduce the optical fiber power at a certain level, the most commonly used type is female to male plug type fiber optic attenuator, it has the optical fiber connector at one side and the other side is a female type fiber optic adapter. Female attenuators...