sheaths to cracking test apparatus

Brand Name:Sinuo

Model Number:SN2317

Place of Origin:China

...Sheaths To Cracking Test Apparatus Standards & Clauses: This test apparatus complies with the standards IEC 60811-509:2012, IEC 60811-508:2012, which specifies test methods for the polymer insulation and sheathing materials of electrical distribution cables and communication cables, including marine cables. It is suitable for the cracking and winding test...

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:Kinte

Model Number:WH-8851

Place of Origin:Guangdong,China (Mainland)

...Cracking Resistance Winding Test Apparatus​ Application: PVC wire and cable, in the high temperature state before the cracking test winding, wire and cable cracking test is also an auxiliary tool for other industries can also be applied to the soft wire winding test. Test...

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the

Brand Name:Kingpo

Place of Origin:China

... for the PVC wire and cable to do the winding test before the split test in the condition of high temperature. It is the auxiliary means for the split test. It is also used for the winding test of the soft wire of other industries. Technical parameters: 1,

Brand Name:AI

Model Number:WCT

Place of Origin:China

...Test Apparatus Summary This instrument is designed and made as per standards T 0615-2011 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering and SH/T0425 Standard Test Method for Wax Content Test of Bitumen. It is used to determine the wax content in the petroleum asphalts by cracking...

Brand Name:SHC

Model Number:SC-RL03

Place of Origin:China

...ts with wires and their couplings under the protection of the sheath, at the wire terminals or ends. The head is not subject to the stress including the wringing and the wear resistance. Technical parameters: Weight 2N, 3N, ...

Brand Name:DAXIAN

Model Number:DX8320

Place of Origin:China

..., thermoplastic rubber, wire and cable insulation sheath and other aging cracking test, under static tension or continuous dynamic tensile deformation, or intermittent Dynamic deformation and static tension alternate deformation, the product is exposed to

Brand Name:Lixian

Model Number:HZ-3610

Place of Origin:China

Footwear Testing Equipment Flexing Tester For Shoes JIS K6260 Footwear Testing Equipment Summary The tester applies to test flexion resistant for rubber products, shoe soles, PU, and other materials. The specimen by constant stretched, bended, and then ...

Place of Origin:China

Brand Name:KeRang

...Cracking Resistance Winding Test Apparatus HDX1311 Standard:IEC60811-3-1,EN60811-3-1, IEC60811-509 clause 9 insulating and sheathing materials of electric and optical cables-common test methods. Application:It is applicable for the PVC wire and cable to do the winding test before the split test in the condition of high temperature. This test method is not recommended. Test sample:PVC insulated and sheathed...

Brand Name:SKYLINE

Model Number:SL-L15

Place of Origin:CN

... that can accurately measure the deformation and cracking of plastics. This allows manufacturers to assess the quality and durability of their plastic materials, ensuring that they meet industry standards and regulations. The Rubber testing function of

Place of Origin:Guangdong, China

Brand Name:Helium

Top sellers leak test instrument electric speaker smart music player sound waterproof test detector machine made in china Leaks occur when a gas or liquid flows from a higher pressure side to a lower pressure side of a part and are caused by holes, cracks...

Brand Name:Zion communication OEM

Model Number:PE Compound

Place of Origin:China

... cable, signal cable, optical cable, power cable and power cord Meet GB/T15065-2009 performance test, good stress cracking resistance, moisture resistance and insulation performance ZCPE-1211M Power cable sheath, optical cable sheath, coaxial sheath,

Brand Name:LIB

Model Number:UV-SI-260

Place of Origin:China

Description of UV Aging Weathering Apparatus UV aging weathering apparatus adopts fluorescent UV lamp as the light source. Its inner temperature and humidity can be properly controlled to obtain the periodic condensation on the sample for fully evaluating...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-E802-2

...Test Chamber , Standard UVA Accelerated Weathering Tester Product description: UV Aging Test Chamber Optimal fluorescent UV lamps using analog section sunlight UV spectrum, combined with temperature control, and other apparatus for the wet material to cause discoloration analogy, brightness, strength decreases, cracking...

Brand Name:YYS

Model Number:CAT5E UTP PLENUM

Place of Origin:CHINA

CAT5E F/UTP UL Listed CMP Solid Bare Cooper 24AWG FEP Insulations, Low Smoke FR-PVC Jacket Conductor Material Bare copper Nom.O.D.(mm) 4X2X0.525 (+/-0.005)mm Insulation Material FEP Diameter 0.91±0.03 mm AL-FOIL Overlapping>25% Sheath Physical Properties...

Place of Origin:Guangdong, China

Brand Name:linkecable

...test, the wire after 150±5ºC, 5 hours of constant temperature, immersed in the temperature of 50±5ºC 1032 paint for 30 minutes, take out drip dry, and then 130±5ºC, 48 hours of constant temperature, after the wire is wound on the specified diameter of the round rod, the wire sheath layer should be no cracking...