ATmega328P-AU IC 8-Bit AVR Microcontroller With 32K Bytes In System Programmable Flash

Microchip ATmega328P-AU IC 8-bit AVR Microcontroller with 32K Bytes In-System Programmable Flash

ATmega328P-AU MCU 8-bit AVR RISC 32KB Flash 2.5V/3.3V/5V 32-Pin TQFP

ATmega328PB-AU MCU 8-Bit ATmega AVR RISC 32KB Flash 5V 32-Pin TQFP

Overview:

The Atmel® ATmega328P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture.

By executing powerful instructions in a single clock cycle, the ATmega328P achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

Features:

● High performance, low power AVR® 8-bit microcontroller

● Advanced RISC architecture

● 131 powerful instructions – most single clock cycle execution

● 32 * 8 general purpose working registers

● Fully static operation

● Up to 16MIPS throughput at 16MHz

● On-chip 2-cycle multiplier

● High endurance non-volatile memory segments

● 32K bytes of in-system self-programmable flash program memory

● 1Kbytes EEPROM ● 2Kbytes internal SRAM

● Write/erase cycles: 10,000 flash/100,000 EEPROM

● Optional boot code section with independent lock bits

● In-system programming by on-chip boot program

● True read-while-write operation

● Programming lock for software security

● Peripheral features

● Two 8-bit Timer/Counters with separate prescaler and compare mode

● One 16-bit Timer/Counter with separate prescaler, compare mode, and capture mode

● Real time counter with separate oscillator

● Six PWM channels

● 8-channel 10-bit ADC in TQFP and QFN/MLF package

● Temperature measurement

● Programmable serial USART

● Master/slave SPI serial interface

● Byte-oriented 2-wire serial interface (Phillips I2 C compatible)

● Programmable watchdog timer with separate on-chip oscillator

● On-chip analog comparator

● Interrupt and wake-up on pin change

● Special microcontroller features

● Power-on reset and programmable brown-out detection

● Internal calibrated oscillator

● External and internal interrupt sources

● Six sleep modes: Idle, ADC noise reduction, power-save, power-down, standby, and extended standby

● I/O and packages
● 23 programmable I/O lines
● 32-lead TQFP, and 32-pad QFN/MLF
● Operating voltage:
● 2.7V to 5.5V for ATmega328P
● Temperature range:
● Automotive temperature range: –40°C to +125°C
● Speed grade:
● 0 to 8MHz at 2.7 to 5.5V (automotive temperature range: –40°C to +125°C)
● 0 to 16MHz at 4.5 to 5.5V (automotive temperature range: –40°C to +125°C)
● Low power consumption
● Active mode: 1.5mA at 3V - 4MHz
● Power-down mode: 1µA at 3V

Ordering part numbers:

Environmental & Export Classifications

About Microchip Technology

Microchip Technology is a leading provider of microcontroller and analog semiconductors, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality.

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of  Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of  Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.