Automatic Horizontal Glass Washing Machine Flat Glass Washer and Vertical Glass washing machine

Name application of Automatic Horizontal Glass Washing Machine

Automatic Horizontal glass washing machine for washing and also drying of glass products, performs automatic washing of products from two sides at the same time, via the upper and lower brushes. The equipment must perform the following operations:

- Glass loading (Automatic from the processing line);

- Glass washing (Automatic);

- Glass drying (Automatic);

- Unloading (Manual).

• Requirements for compressed air.

Pressure – 6 bar.

• Water Requirements.

Pressure-4 bar.

Water tank details►

The washing part in contact with water is made of stainless steel

Air knives detail ►

Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)

High quanlity profile detail►

Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency

The fan detail►

The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning

Technical parameters:

1. Maximum glass width: 2500mm (effective maximum: 2650mm)

2. Minimum glass specification: 400mm×400mm (limited to single row on left and right sides)

3. Glass thickness: 3mm-25mm (digital display)

4. Speed range: glass thickness within 3-25mm Vmax=1-12m/min

5. Main drive, brush speed regulation method: frequency control

6. Table height :900±25mm

Glass washing machine used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and outgoing segment.

Origin of motor and main accessories:

Automatic Vertical Glass washing machine

Vertical Auto Industry Flat Glass Washing and Cleaning Machine

1. Overview of Auto Vertical Glass Washing and cleaning Machine
Auto Industry Flat glass washing machine is used for glass washing for processing Double glazing glass.Auto vertical washing and cleaning machine can complete the following functions: pre-cleaning, cleaning and drying of flat glass and low-e glass.It is in the production of slot aluminum insulating glass. Glass washing machine has the advantages of small occupation area, high efficiency, reliable performance and convenient maintenance.

2.Advantage of glass cleaning machine
•Using 3Pair of soft brushes with 0.1mm soft hair, can wash low-e glass
•Pre-washing (Optional)
•The air knife can automatically adjust the width of the air knife according to the thickness
•New air knife uses aluminum profile (Duckbill Air Knife), the size of the air outlet is adjusted by the aluminum profile duck beak. This can reduce the number of adjusting screws, ensure that each screw is not loose, and avoid the resonance of the air knife.
•European silencer system
•The operation box with washing speed display, can accurately display washing speed (8-10m) •Water tank automatic temperature control, water replenishing system
•Stainless steel material
3.Main feature of vertical glass washing machine

• Automatic vertical cleaning machine adopts Siemens control system, which can freely adjust the cleaning speed of cleaning machine.

• 

• Vertical Automatic washing machine can Wash online and offline low-e glass, automatically recognizes Low-e film
• 
• Vertical Automatic washing machine Using 6 pieces of soft brushes

• 

• The pre-cleaning section adopts stepless frequency conversion speed regulation, and the glass can run smoothly at the right speed.
• Water tank automatic temperature control, water replenishing system Cleaning and water tanks are made of stainless steel and corrosion resistant materials, and the transfer rollers are acid and alkali resistant rubber rollers, which are automatically adjusted according to the glass thickness.

• 304 stainless steel materials
• Automatic vertical washing machine Using intelligent intermittent energy-saving working methods
• Automatic vertical washing machine adopt European silencer system
• The air knife can automatically adjust the width of the air knife according to the thickness
• Automatic vertical washing machine Adopt variable frequency fan, energy efficient, good cleaning effect
• Hierarchical type washing system

4. Tech Parameters of Vertical Glass cleaning and Drying Machine

5. Detail of AutomaticGlass Washing Machine