MAIN FEATURES
Easy to use 5-key waterproof keyboard.
Highly efficient red LED display with 6 20-mm digits and 6 LEDs for
showing active functions.
Stainless steel protective case.
Frontal panel in alluminium, with protection gasket.
Dimensions 170x115x68mm, fitted with support bracket (168x150mm)
for table or wall mounting.
Calibration, Set-Up parameters, configurable from keyboard or from
PC with DINI TOOLS.
Up to 1.000.000 displayable divisions with internal resolution up
to 3.000.000 points.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
Connectable with up to 8 analogue load cells with 350 Ohm input
resistance.
Management of a digitally equalised 4-cell weighing system or
management of 4 independent weighing systems.
From 12 Vdc to 24 Vdc power supply; 12Vdc power adapter included.
MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)
OIML R76
OIML R61 - MID
OIML R51
TRANSMITTER / INDICATOR: FUNCTIONS
THROUGH KEYBOARD:
Zeroing; Semi automatic and presettable tare, print and/or data
transmission; ON/Stand-by.
SELECTABLE:
High Resolution Weighing x 10; Net/Gross or lb/kg conversion;
Weighs totalisation; Formulation; Counting; In/Out Truck weighing;
Hold e Peak.
EXTERNAL INPUT:
Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT:
Set Point Control on the weight, either positive (in loading) or
negative (in unloading), or on the pieces (counting mode), with
programmable enabling/disabling thresholds, as direct check or upon
weight stability.
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights;
Clearing; Semi automatic and presettable tare; Scale switch;
Setting of outputs activation thresholds.
DGT20 and DGT20AN models: Reading of microvolts or ADC converter
for all the channels; Message display; Printing; Setting of APW in
counting mode; Simulation of key pressure; MODBUS serial protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGT20AN):
Analogue output proportional to the net or gross weight, either
positive (in loading) or negative (in unloading).
MASTER/REPEATER OPTION (MSTSLV code)
Specific programme for use of the indicator as a universal weight
repeater or as a multi-scale repeater (MASTER) in combination with
DFW/DGT/MCW.
LED Load Cell Indicator , Digital Electronic Indicator 6 Wire Load Cell Support
